Flow rate: Nominal 200 Litres/min (44.5 gallons/min) at 1500rpm
Self-priming from dry up to 2.4m (7.8ft)
Model No.: 50220 Series
- Constructed from marine quality bronze and stainless steel for ruggedness and reliability.
- Easy to service and maintain.
- Inexpensive to buy and operate.
- Will tolerate abrasive wear (this may affect performance – seek advice from your distributer).
- Handles hard and soft solids without clogging.
- Can pump in either direction.
- Will not airlock.
|Body Materials||Bronze head, Cast Iron bearing housing|
|Impeller||Neoprene or Nitrile|
|Shaft Material||Stainless steel|
|Seal||Carbon/ceramic mechanical type|
|Bearings||Twin single row, ball type|
|Port Type||1 1/2″ Flange|
|Clutch Type||Electro-magnetic 12 or 24Vdc|
|Pulley||178mm (7″) ‘A’ or ‘B’ section|