22610 Series Ballast King Bronze DC Pump



Wakeboard and Ski boat Ballast Pump

Flow rate: 15 USgallons/min (57 Litres/min)
Self-priming from dry up to 1.2m (4ft)


Model No.: 22610 Series

  • Adds approx 125lbs (56kgs) of ballast per minute
  • Reversible to both fill and empty tanks
  • Simple design means fewer wearing parts.
  • ISO 8846 MARINE (Ignition protection).



The Ballast King is designed to pump water into Wakeboard Liquid Ballast Tanks and when reversed will also pump water out of them. It has a flow rate of 15 gallons per minute, so it can fill most ballast tanks in about five minutes. It is equipped with a Run-Dry Protection Device (patent pending) to automatically shut-off the pump and protect the impeller from run-dry damage should the pump be mistakenly left on after the Ballast Tank is empty.



Body Materials Bronze
Impeller Jabsco Neoprene compound
Seal Lip Type
Port(s) 1/2″ Internal Pipe Threads 1″ External Hose Barb
Voltage 12 (Vdc)
Amp Draw 19 (amp)
Fuse Size 25 (amp)
Motor Type Equipped with Run-Dry Protection Device (Patent Pending) Permanent Magnet Type Fully Enclosed Stainless Steel Shaft Ball Type Shaft Bearing Reversible
Duty Cycle 30 Minutes Max.
Dimensions 9.3 x 20.3 x 12 (cms)
3 5/8 x 8 x 4 3/4 (inches)
Weight 3 (kg)
6.6 (lb)


4 Models

22610-2007 Reversing Switch Not Included
Port(s) BSP Internal Thread
22610-9007 Reversing Switch Not Inlcuded
Port(s) NPT Internal Thread
22610-9407 Deutsch Connector, No Reversing Switch
Port(s) NPT Internal Thread
22610-9507 Reversing Switch Included
Port(s) NPT Internal Thread



 Promotional Datasheet