Wakeboard Towboat Ballast Pump
Flow rate: 9 USgallons/min (34 Litres/min)
Self-priming from dry up to 1m (3ft)
Model No.: 18220 Series
- Adds approx 80lbs (36kgs) of ballast per minute
- Reversible to both fill and empty tanks
- Simple design means fewer wearing parts.
- ISO 8846 MARINE (Ignition protection).
The Ballast Puppy is designed to pump water into Wakeboard Liquid Ballast Tanks and when reversed will also pump water out of them. It has a flow rate of 9 gallons per minute, so it can fill most ballast tanks in about five minutes. It is equipped with a Run-Dry Protection Device (patent pending) to automatically shut-off the pump and protect the impeller from run-dry damage should the pump be mistakenly left on after the Ballast Tank is empty.
|Impeller||Jabsco Neoprene compound|
|Port(s)||1/2″ Internal Pipe Threads1″ External Hose Barb|
|Amp Draw||11.5 (amp)|
|Fuse Size||15 (amp)|
|Motor Type||Equipped with Run-Dry Protection Device(Patent Pending)Permanent
Magnet TypeFully EnclosedStainless Steel ShaftBall Type Shaft BearingReversible
|Dimensions||9.3 x 18.2 x 12 (cms)
3 5/8 x 7 1/8 x 4 3/4 (inches)
|18220-1127||Reversing Switch Included|
|18220-2127||Reversing Switch Not Included|
|18220-9127||Deutsch Connector, No Reversing Switch|