VR050 50l Diesel Refuelling Pump

Posted on by tugz

50l Diesel Refuelling Pump

12/24V Fuel Transfer Pump

 

Flow rate: 50 Litres/min (13 gallons/min)
Self-priming from dry up to 2.4m (7.8ft)

 

Model No.: VR050

  • High head capability – 10 metres (32 feet.)
  • Self priming up to 3 metres (9.6 feet.)
  • Continuously rated
  • Vibration tested
  • IP55 protected motor
  • 24V version with thermal cut-out protection
  • Full range of installation accessories
  • Customised kits for OEM customers

 

Specifications

Body Materials Cast Iron
Rotor Sintered Iron
Vanes Sintered Bronze
Seal Nitrile Lip Seal
Shaft Material Steel
Port Type 3/4″ BSP or 25mm (1″) hose adaptors
Voltage 12 or 24 (Vdc)
Motor Type Permanent magnet, corrosion resistant IP55 protected
Temperature Range -22 to +104 (°F)
-30 to +40 (°C)
Duty Cycle Continuously rated up to 3 metres (10 ft.),total head of diesel fuel at 40°C (104°F)

 

8 Models

VR050-1022 Jabsco 50l Diesel Refuelling Pump
12v, with switch & fuse

Voltage 12 (Vdc)
Amp Draw 12 (amp)
Fuse Size 20 (amp)
Port Type 25mm (1″) Hose barb
VR050-1120 Jabsco 50l Diesel Refuelling Pump
Voltage 24 (Vdc)
Amp Draw 6 (amp)
Fuse Size 10 (amp)
Port Type 25mm (1″) Hose barb
VR050-1122 Jabsco 50l Diesel Refuelling Pump
24v, with switch & fuse

Voltage 24 (Vdc)
Amp Draw 6 (amp)
Fuse Size 10 (amp)
Port Type 25mm (1″) Hose barb
VR050-1123 Jabsco 50l Diesel Refuelling Pump
24v, with automatic shut off controller

Voltage 24 (Vdc)
Amp Draw 6 (amp)
Fuse Size 10 (amp)
Port Type 25mm (1″) Hose barb
VR050-2022 Jabsco 50l Diesel Refuelling Pump
12v, switch & fuse

Voltage 12 (Vdc)
Amp Draw 12 (amp)
Fuse Size 20 (amp)
Port Type 3/4″ BSP
VR050-2120 Jabsco 50l Diesel Refuelling Pump
Voltage 24 (Vdc)
Amp Draw 6 (amp)
Fuse Size 10 (amp)
Port Type 3/4″ BSP
VR050-2122 Jabsco 50l Diesel Refuelling Pump
24v, with switch & fuse

Voltage 24 (Vdc)
Amp Draw 6 (amp)
Fuse Size 10 (amp)
Port Type 3/4″ BSP
VR050-B013 Jabsco 50l Diesel Refuelling Pump
24v, with switch & fuse, fitted with by-pass

Voltage 24 (Vdc)
Amp Draw 6 (amp)
Fuse Size 10 (amp)
Port Type 25mm 1″ Hose barb

Downloads

 Technical Data Sheet
; Designed for refuelling medium sizes diesel powered vehicles [typical tank sizes 200 – 500 litres (50 – 200 gallons)] from drums.

; Suitable for mounting to the following equipment: Excavators, Cranes, Road rollers (compactors), Pavers, Agricultural machines, Generators, Helicopters.

; Suitable for diesel fuel, Kerosene, Paraffin, Hydraulic oils, Oils up to 150 centi Stokes (750 Saybolt Universal) viscosity.