Flojet’s K56 Series Water Booster Systems are designed for supplying consistent water pressure to beverage dispensers, coffee machines, water filtration systems, carbonators & ice machines.
Supplies up to 4 gpm (15 lpm). For use when water requirement is over 1.7 gpm (6.4 lpm).
Supplies up to 4 gpm (15 lpm). For use when water requirement is over 1.7 gpm (6.4 lpm).
Model No: K56 Series Water Booster System K56-1030A
Single pump with 1/2 gallon accumulator tank and a large muffler
- Half-gallon (1.9L) accumulator tank maintains constant flow requirements
- Capable of CO2 inlet pressures of up to 90 psi (6.2 bar)
- Ultimate performance and reliability, with extended service life
- Quiet operation with exhaust muffler
- Easy installation with all quick disconnect ports
Applications
Designed for dispensing Bag-in-Box syrups, juice concentrate (without pulp or particulates), teas, wines and liquor;Supplies the following from remote location: 4 x 3.0 oz (89ml) valves (each dispenses at 0.5 oz/sec); or 2 x 4.5 oz (133ml) valves (each dispenses at 0.75 oz/sec).
Specifications
Power Source
CO2 Gas, Nitrogen or Compressed Filtered Air
Materials of Construction
Polypropylene, Santoprene, EPDM, Nylon, Butyl,
AISI 303 & 304 Stainless Steel, Brass
AISI 303 & 304 Stainless Steel, Brass
Temperature Range
34-120 (°F)
1.1-49 (°C)
1.1-49 (°C)
Displacement
3.2 oz. per cycle
Self Priming
Up to 10 ft. (3.05 m)
Operating Pressure
60 – 90 (psi )
4.1 – 6.2 (bar)
4.1 – 6.2 (bar)
Displacement US Gallons (litres)
2.5 oz per cycle
Flow Rate US gallons (litres)
4.0 oz/sec (118.3ml/sec) – open flow
Operating Pressure
20 – 80 PSI; 1.4 – 5.5 bar
Maximum Liquid Pressure
30 (psi)
2.1 (bar)
2.1 (bar)
Maximum Liquid Pressure
30 (psi)
2.1 (bar)
2.1 (bar)
Flow Rate
5 (gpm)
18.9 (lpm)
18.9 (lpm)
Tank Charge Pressure
20 (psi)
1.4 (bar)
1.4 (bar)
Dimensions
30.48 x 29.21 x 17.78 (cms)
12 H x 11.5 W x 7 D (inches)
12 H x 11.5 W x 7 D (inches)
Weight
2.46 (kg)
5.42 (lb)
5.42 (lb)
Product Inlet Fitting
1/2″ (12.7mm) Barbed Straight
Plastic Barbed Straight Plastic
Plastic Barbed Straight Plastic
Product Outlet Fitting
1/2″ (12.7mm) Barbed Straight
Nylon Barbed Straight Plastic
Nylon Barbed Straight Plastic
Gas/Air Inlet Fitting
1/4″ (6.35mm) CO2 Shutoff
Brass CO2 Shutoff Brass Straight
Brass CO2 Shutoff Brass Straight