53040 Series Bronze ‘Utility Pump’ AC Motor Pump Unit

040 Size Bronze Flexible Impeller Utility Pump

Flow rate: Nominal 35 Litres/min (7.8 gallons/min) at 1500rpm
Self-priming from dry up to 2.4m (7.8ft)
Pressure up to 2 bar

 

Model No.: 53040 Series

• Easy to service and maintain.
• Will tolerate abrasive wear (this may affect performance – seek advice from your distributer).
• Handles hard and soft solids without clogging.
• Non pulsating flow
• Handles viscosities up to 500 centiPoise
• Dry running capability for 30 minutes

 

Specifications

Body Materials	Bronze
Impeller	Neoprene or Nitrile
Seal	Carbon/Ceramic mechanical seal
Bearings	Uses motor bearings
Shaft Material	Stainless steel motor shaft
Port Type	1″ BSP internal thread to BS21 (DIN2999)
Voltage	110 or 230 (VAC)
Frequency	50 (Hz)
Motor	550W IP55
Cable	Fitted with 2m long supply cable
Weight	9.5 (kg) 20.9 (lb)

 

5 Models

53040-2001
	Jabsco 53040 Bronze PumpSelf-primes from dry up to 3 metres, flows up to 35 LPM, pressure up to 36.3 psi (2.5 bar) CE Yes Voltage 230/1/50 Impeller Neoprene Style MPU
53040-2003
	Jabsco 53040 Bronze PumpSelf-primes from dry up to 3 metres, flows up to 35 LPM, pressure up to 36.3 psi (2.5 bar) CE Yes Voltage 230/1/50 Impeller Nitrile Style MPU
53040-2021
	Jabsco 53040 Bronze PumpSelf-primes from dry up to 3 metres, flows up to 35 LPM, pressure up to 36.3 psi (2.5 bar) CE Yes Voltage 230/1/50 Impeller Neoprene Style MPU
53040-2101	53040 Bronze ‘Utility Pump’ AC Motor Pump Unit
	Impeller Neoprene Voltage 110 (VAC) Amp Draw 8 (amp) Poles 4 Speed 1450 (rpm)
53040-2103
	Jabsco 53040 Bronze PumpSelf-primes from dry up to 3 metres, flows up to 35 LPM, pressure up to 36.3 psi (2.5 bar) CE Yes Voltage 110/1/50 Impeller Neoprene Style MPU

Downloads

 Technical Data Sheet