50010 Bronze AC Motor Pump Unit

50010 Bronze AC Motor Pump Unit

010 Size Bronze Flexible Impeller Pump

Flow rate: Nominal 6 Litres/min (1.3 gallons/min) at 1500rpm
Self-priming from dry up to 1.5m (4.9ft)
Pressure up to 2.5 bar

 

Model No.: 50010 Series

  • Easy to service and maintain.
  • Will tolerate abrasive wear (this may affect performance – seek advice from your distributer).
  • Handles hard and soft solids without clogging.
  • Non pulsating flow
  • Handles viscosities up to 500 centiPoise
  • Uses standard IEC motor

 

Specifications

Body Materials Bronze
Impeller Neoprene or Nitrile
Seal Nitrile lip seal
Bearings Uses motor bearings
Shaft Material Stainless steel shaft extension
Port Type 3/8″ BSP internal thread and 19mm (3/4″) borehose connections.
Voltage 230 (VAC)
Frequency 50 (Hz)
Motor IEC 72 180W B3/B14 63 Frame IP55
Weight 6.3 (kg)
13.8 (lb)

 

2 Models

50010-2411
Jabsco 50010 Bronze PumpSelf primes from dry up to 1.5 metres, flows up to 6 LPM, pressure up to 36.2 psi (2.5 bar)

CE Yes
Voltage 230/1/50
Impeller Neoprene
Style MPU
50010-2413
Jabsco 50010 Bronze PumpSelf primes from dry up to 1.5 metres, flows up to 6 LPM, pressure up to 36.2 psi (2.5 bar)

CE Yes
Style MPU
Voltage 230/1/50
Impeller Nitrile

 

Downloads

 Technical Data Sheet

 

Industrial : Industrial filling systems, utility shop pump, transfer systems, recharge water softeners, sump emptying, cooling tower circulation, line cleaning, heat exchangers, air scrubbers, laboratory circulation, oil changing.;

Plumbing : Empty clogged drains, sumps, sinks & tubs, pump out water closets.;

Contractors : Cement mixing, wash down equipment, fill & empty tanks, empty basements.;

Agricultural : Fill water tanks, flush animal pens, plumbing water for livestock.;

Food, Beverage & Dairy : Vending Machines, refrigeration condensate pump out, wash down equipment & floor cleaning.