Flexible Impeller Pumps
Jabsco
040 Size Epoxy Pump Head Kit
Flow rate: Nominal 40 Litres/min (8.9 gallons/min) at 1500rpm
Self-priming from dry up to 5m (16.4ft)
Pressure up to 3 bar
Model No.: 28260 Series
- Easy to service and maintain.
- Will tolerate abrasive wear (this may affect performance – seek advice from your distributer).
- Handles hard and soft solids (max 5mm diameter) without clogging.
- Non pulsating flow
- Handles viscosities up to 10,000 centiPoise
- High chemical resistance Epoxy plastic
- No metal parts in liguid contact
- Fits IEC standard motor B3/B14, frame 80
Specifications
| Body Materials |
Epoxy Thermoset plastic |
| Pump/Motor Adapter |
Epoxy coated cast iron |
| Impeller |
Neoprene, Nitrile or Viton |
| Seal |
Carbon/ceramic mechanical type |
| Seal Elastomer |
Nitrile or Viton |
| Bearings |
Uses motor bearings |
| Shaft Material |
Epoxy covered stainless steel shaft extension |
| Port Type |
3/4″ BSP external thread to BS21 (DIN2999) |
| Weight |
1.7 (kg)
3.74 (lb) |
6 Models
| 28260-2101 |
Epoxy Flexible Impeller Pump Head Kit |
|
| Impeller |
Neoprene |
| Seal Elastomer |
Nitrile |
| Seal |
Carbon/mechanical face type |
|
| 28260-2103 |
Epoxy Flexible Impeller Pump Head Kit |
|
| Impeller |
Nitrile |
| Seal Elastomer |
Nitrile |
| Seal |
Carbon/mechanical face type |
|
| 28260-2104 |
Epoxy Flexible Impeller Pump Head Kit |
|
| Impeller |
Viton |
| Seal Elastomer |
Viton |
| Seal |
Carbon/mechanical face type |
|
| 28260-2121 |
Epoxy Flexible Impeller Pump Head Kit |
|
| Impeller |
Neoprene – High Pressure |
| Seal Elastomer |
Nitrile |
| Seal |
Carbon/mechanical face type |
|
| 28260-2201 |
Epoxy Flexible Impeller Pump Head Kit |
|
| Impeller |
Neoprene |
| Seal Elastomer |
Nitrile |
| Seal |
Tungsten Carbide/hard-faced mechanical type |
|
| 28260-2903 |
Epoxy Flexible Impeller Pump Head Kit |
|
| Impeller |
Nitrile |
| Seal Elastomer |
Nitrile |
| Seal |
Tungsten Carbide/hard-faced mechanical flushed type |
|
Downloads
Technical Data Sheet
