Flow rate: Nominal 40 Litres/min (8.9 gallons/min) at 1500rpm
Self-priming from dry up to 5m (16.4ft)
Pressure up to 3.0 bar
Model No.: 28240 Series
- Easy to service and maintain.
- Will tolerate abrasive wear (this may affect performance – seek advice from your distributer).
- Handles hard and soft solids without clogging.
- Non pulsating flow
- Handles viscosities up to 4,000 centiPoise
- Minimal shear to thixotropic fluids
- Fits IEC standard motor B3/B14, frame 80
Specifications
| Body Materials | 316 Stainless steel |
| Pump/Motor Adapter | Epoxy coated cast iron |
| Impeller | Neoprene, Nitrile, EPDM or Viton |
| Seal | Carbon/Ceramic mechanical type, Optional: Tungsten Carbide/Ceramic hard faced mechanical seal or Tungsten Carbide / Ceramic hard faced flushed seal |
| Seal Elastomer | Nitrile or Viton |
| Shaft Material | Stainless steel 316 shaft extension |
| Bearings | Twin single row, ball type |
| Port Type | 3/4″ BSP internal thread to BS21 (DIN2999) |
| Weight | 2.6 (kg) 5.7 (lb) |
3 Models
28240-2203Stainless Steel Flexible Impeller Pump Head Kit
| Impeller | Nitrile |
| Seal Elastomer | Nitrile |
| Seal | Tungsten Carbide/Ceramic hard faced mechanical type |
28240-2903Stainless Steel Flexible Impeller Pump Head Kit
| Impeller | Nitrile |
| Seal Elastomer | Nitrile |
| Seal | Carbon/Ceramic mechanical flushed seal |
28240-2123Stainless Steel Flexible Impeller Pump Head Kit
| Impeller | High Pressure Nitrile |
| Seal Elastomer | Nitrile |
| Seal | Carbon/Ceramic mechanical type |
Downloads
Technical Data Sheet
Performance Curves (European)
Performance Curves (US)