Flow rate: 11 USgpm, maximum head 50ft (21.6psi)
Self-priming from dry up to 2.4m (7.8ft)
Use where corrosion resistant phenolic or glass-filled expoxy materisl, self-priming and debris tolerance is desired. Nitrile impeller is ideal for oil based products. Use Neoprene for water and general purpose pumping.
Model No.: 17430 Series
- Easy to service and maintain.
- Will tolerate abrasive wear (this may affect performance – seek advice from your distributer).
- Handles hard and soft solids without clogging.
- Non pulsating flow
Specifications
| Body Materials | Epoxy Plastic |
| Impeller | Neoprene, Nitrile or Viton |
| Seal | Carbon/ceramic mechanical type |
| Bearings | Uses motor bearings |
| Shaft Material | Corrosion Resistant Steel with EpoxyDrive Sleeve in Contact with Fluid |
| Port Type | 1/2″ NPT Internal |
| Voltage | 115 (VAC) |
| Frequency | 60 (Hz) |
| Motor | 1/2hp 1725rpm |
| Weight | 15.3 (kg) 33.5 (lb) |
3 Models
| 17430-0001 | Epoxy Flexible Impeller AC Motor Pump Unit | ||||
|
|||||
| 17430-0003 | Epoxy Flexible Impeller AC Motor Pump Unit | ||||
|
|||||
| 17430-0004 | Epoxy Flexible Impeller AC Motor Pump Unit | ||||
|
