Nozzle comparison:
Left: normal flat jet nozzle
Right: the Kränzle knife-jet nozzle (M) with significantly narrower profile
The impact area of the high-pressure water jet is approx. three quarters narrower compared to conventional
flat jet nozzles. Thus the same pressure takes affect on a quarter of the former impact
area, leading to a 4 times bigger impact pressure and an enormously increased cleaning efficiency.
Stainless steel lance with flat jet nozzle
| Nozzle | Length mm | Ord. no. |
| M20028 | 500 | 12,393-M20028 |
| M2003 | 500 | 12,393-M2003 |
| M20042 | 500 | 12,393-M20042 |
| M20045 | 500 | 12,393-M20045 |
| D2507 | 500 | 12,393-D2507 |
| M20035 | 600 | 12,392 2-M20035 |
| M20045 | 600 | 12,392 2-M20045 |
| D2504 | 600 | 12,392 2-D2504 |
| D25045 | 600 | 12,392 2-D25045 |
| D2505 | 600 | 12,392 2-D2505 |
| D2506 | 600 | 12,392 2-D2506 |
| D2507 | 600 | 12,392 2-D2507 |
| M2008 | 600 | 12,392 2-M2008 |
| M2010 | 600 | 12,392 2-M2010 |
| M2011 | 600 | 12,392 2-M2011 |
| M20125 | 600 | 12,392 2-M20125 |
Stainless steel lance with regulating nozzle
| Nozzle Length mm | Ord. no. | |
| D2503 | 600 | 12,395-D2503 |
| D2504 | 600 | 12,395-D2504 |
| D25045 | 600 | 12,395-D25045 |
| D2505 | 600 | 12,395-D2505 |
| D25055 | 600 | 12,395-D25055 |
| D2507 | 600 | 12,395-D2507 |
Stainless steel lance with regulating nozzle Vario-Jet
| Nozzle | Length mm | Ord. no. |
| Vario-Jet 03 | 500 | 41,156 8-03 |
| Vario-Jet 042 | 500 | 41,156 8-042 |
| Vario-Jet 055 | 500 | 41,156 8-055 |
Stainless steel lance with regulating nozzle
| Nozzle | Length mm | Ord. no. |
| M20042 | 500 | 12,701-M20042 |