Flexible Impeller Pumps
Jabsco
080 Size Epoxy Pump Head Kit
Flow rate: Nominal 80 Litres/min (17.7 gallons/min) at 1500rpm
Self-priming from dry up to 2.4m (7.8ft)
Pressure up to 3.5 bar
Model No.: 28350 Series
- Easy to service and maintain.
- Will tolerate abrasive wear (this may affect performance – seek advice from your distributer).
- Handles hard and soft solids (max 5mm diameter) without clogging.
- Non pulsating flow
- Handles viscosities up to 4,000 centiPoise
- High chemical resistance Epoxy plastic
- No metal parts in liguid contact
Specifications
| Body Materials |
Epoxy Thermoset plastic |
| Bearing Housing |
Epoxy coated cast iron |
| Impeller |
Neoprene, Nitrile or Viton |
| Seal |
Carbon/ceramic mechanical type |
| Seal Elastomer |
Nitrile or Viton |
| Bearings |
Twin single row, ball type |
| Shaft Material |
Epoxy covered stainless steel |
| Port Type |
1″ BSP external thread to BS21 (DIN2999) |
| Weight |
(kg)
(lb) |
6 Models
| 28350-2101 |
Epoxy Flexible Impeller Pedestal Pump |
|
| Impeller |
Neoprene |
| Seal Elastomer |
Nitrile |
| Seal |
Carbon/ceramic mechanical type |
|
| 28350-2103 |
Epoxy Flexible Impeller Pedestal Pump |
|
| Impeller |
Nitrile |
| Seal Elastomer |
Nitrile |
| Seal |
Carbon/ceramic mechanical type |
|
| 28350-2104 |
Epoxy Flexible Impeller Pedestal Pump |
|
| Impeller |
Viton |
| Seal Elastomer |
Viton |
| Seal |
Carbon/ceramic mechanical type |
|
| 28350-2123 |
Epoxy Flexible Impeller Pedestal Pump |
|
| Impeller |
Nitrile – High Pressure |
| Seal Elastomer |
Nitrile |
| Seal |
Carbon/ceramic mechanical type |
|
| 28350-2124 |
Epoxy Flexible Impeller Pedestal Pump |
|
| Impeller |
Viton – High Pressure |
| Seal Elastomer |
Viton |
| Seal |
Carbon/ceramic mechanical type |
|
| 28350-2125 |
Epoxy Flexible Impeller Pedestal Pump |
|
| Impeller |
Neoprene – High Pressure |
| Seal Elastomer |
Nitrile |
| Seal |
Carbon/ceramic mechanical type |
|
