200 Size Stainless Steel Flexible Impeller Pump Head Kit
Flow rate: Nominal 200 Litres/min (44.5 gallons/min) at 1500rpm
Self-priming from dry up to 5m (16.4ft)
Pressure up to 2.5 bar
Model No.: 28440 Series
- Easy to service and maintain.
- Will tolerate abrasive wear (this may affect performance – seek advice from your distributer).
- Handles hard and soft solids without clogging.
- Non pulsating flow
- Handles viscosities up to 4,000 centiPoise
- Minimal shear to thixotropic fluids
- Fits IEC standard motor B3/B14, frame 90
Specifications
| Body Materials | 316 Stainless steel |
| Pump/Motor Adapter | Epoxy coated cast iron |
| Impeller | Neoprene, Nitrile, EPDM or Viton |
| Seal | Carbon/Ceramic mechanical type, Optional: Tungsten Carbide/Ceramic hard faced mechanical seal or Tungsten Carbide / Ceramic hard faced flushed seal |
| Seal Elastomer | Nitrile or Viton |
| Bearings | Uses motor bearings |
| Shaft Material | 316 Stainless steel, shaft extension |
| Port Type | 1 1/2″ BSP internal thread to BS21 (DIN2999) |
| Weight | 6.4 (kg) 14.1 (lb) |
2 Models
| 28440-2215 | Stainless Steel Flexible Impeller Pump Head Kit | ||||||
|
|||||||
| 28440-2715 | Stainless Steel Flexible Impeller Pump Head Kit | ||||||
|
Downloads
Technical Datasheet
Performance Curve (European)
Performance Curves (US)