Jabsco
Sliding Vane Pumps
24v Fuel Transfer Pump
Flow rate: 105 Litres/min (28 gallons/min)
Self-priming from dry up to 2.4m (7.8ft)
Model No.: VR100
- Continuously rated
- Thermal overload protected
- Vibration tested
- IP55 protected motor
- Full range of installation accessories
- Customised kits for OEM customers
Specifications
| Body Materials |
Cast Iron |
| Rotor |
Sintered Iron |
| Vanes |
Sintered Bronze |
| Shaft Material |
Stainless steel |
| Seal |
Nitrile Lip Seal |
| Port Type |
1″ BSP or 32mm (1 1/4″) hose adaptors |
| Voltage |
24 (Vdc) |
| Motor Type |
Permanent magnet, thermal overload & IP55 protected |
| Temperature Range |
-22 to +122 (°F)
-30 to +50 (°C) |
| Duty Cycle |
Continuously rated up to 6 metres (20 ft.),total head of diesel fuel at 20°C (68°F) |
4 Models
| VR100-1120 |
Jabsco 100l Diesel Refuelling Pump |
|
| Voltage |
24 (Vdc) |
| Amp Draw |
23 (amp) |
| Fuse Size |
25 (amp) |
| Port Type |
32mm (1.25″) Hose barbs |
|
| VR100-1122 |
Jabsco 100l Diesel Refuelling Pump |
|
| Voltage |
24 (Vdc) |
| Amp Draw |
23 (amp) |
| Fuse Size |
25 (amp) |
| Port Type |
32mm (1.25″) Hose barbs |
|
| VR100-1123 |
Jabsco 100l Diesel Refuelling Pump |
|
| Voltage |
24 (Vdc) |
| Amp Draw |
23 (amp) |
| Fuse Size |
25 (amp) |
| Port Type |
32mm (1.25″) Hose barbs |
|
| VR100-2120 |
Jabsco 100l Diesel Refuelling Pump |
|
| Voltage |
24 (Vdc) |
| Amp Draw |
23 (amp) |
| Fuse Size |
25 (amp) |
| Port Type |
1″ BSP |
|
Download
Technical Data Sheet
