24v Fuel Transfer Pump
Flow rate: 105 Litres/min (28 gallons/min)
Self-priming from dry up to 2.4m (7.8ft)
Model No.: VR100
- Continuously rated
- Thermal overload protected
- Vibration tested
- IP55 protected motor
- Full range of installation accessories
- Customised kits for OEM customers
Specifications
| Body Materials | Cast Iron |
| Rotor | Sintered Iron |
| Vanes | Sintered Bronze |
| Shaft Material | Stainless steel |
| Seal | Nitrile Lip Seal |
| Port Type | 1″ BSP or 32mm (1 1/4″) hose adaptors |
| Voltage | 24 (Vdc) |
| Motor Type | Permanent magnet, thermal overload & IP55 protected |
| Temperature Range | -22 to +122 (°F) -30 to +50 (°C) |
| Duty Cycle | Continuously rated up to 6 metres (20 ft.),total head of diesel fuel at 20°C (68°F) |
4 Models
| VR100-1120 | Jabsco 100l Diesel Refuelling Pump | ||||||||
|
|||||||||
| VR100-1122 | Jabsco 100l Diesel Refuelling Pump | ||||||||
|
|||||||||
| VR100-1123 | Jabsco 100l Diesel Refuelling Pump | ||||||||
|
|||||||||
| VR100-2120 | Jabsco 100l Diesel Refuelling Pump | ||||||||
|
Downloads
Designed for refuelling large diesel powered vehicles [typical tank sizes 400 – 1500 litres (100 – 400 gallons)] from drums.
This pump can be used where high flow rates, heads and superior priming performance is required.
Suitable for mounting to the following equipment: Excavators, Cranes, Road rollers (compactors), Pavers, Agricultural machines, Generators, Helicopters.
Suitable for diesel fuel, Kerosene, Paraffin, Hydraulic oils, Oils up to 150 centi Stokes (750 Saybolt Universal) viscosity.